In order to upgrade the firmware of a particular Android TV box, Amlogic USB Burning Tool is the main tool you’re going to need.
Addressing the issues of “Parse Burning Image Fail”, “Get Key Failed”, and many more are the benefits that you can get with the Amlogic USB Burning Tool.
Moreover, you can also have a solution to any update-related problem alongside the .img format that your Android box might be going to face.
For your comfortableness, this article will provide a guide on how to use the Amlogic USB Burning Tool to update Firmware in 2022.
How to use the Amlogic USB Burning Tool?
Make sure that you have a device that’s based on Amlogic before doing an action because each chipset manufacturer has its own way of doing things.
This process is specifically for Amlogic devices like Cosycost Android Tv Box. The next thing to keep in mind is while upgrading the firmware do not ever disconnect the power to your TV box.
Lastly, always use the “Normal erase” configuration option except if you are an expert on what you are doing.
Make sure the file you will be downloading will at least work in Windows 7,8,8.1 and 10 to use the Amlogic USB Burning Tool.
However, it will need be needing Administrator permissions for it to run. You will change a system using another device, therefore Windows ensure you know what you’re doing.
Extract it into a temporary directory once you’ve downloaded the file for USB Burning Tool. After that, you will encounter a Setup.exe file that holds the version number.
Now, connect your Android TV box to your computer. And a friendly reminder, before you start installing the USB Burning Tool, make sure that your PC is on and the Android TV box is connected.
It is necessary before installing the USB burning tool.
How do you Install the Amlogic USB Burning Tool on your PC?
Installing the Amlogic USB Burning Tool is somewhat easy using Windows PC.
The only minor issue you will encounter is a message from Windows like “Windows protected your PC” during the start of installation.
However, this is not going to happen to anyone because everyone has different settings set up. Just check to box saying “I understand the risk and want to run the app” to proceed.
After that, a frame of USB Burning Tool that welcomes you will show up and you just have to press next.
Next, you will be asked where to put the file that you want to be installed and also if you want to create a Start Menu folder.
After selecting one of those options, you’re given the final chance to decide to proceed to install. Just click the install for the process to start.
Previously, the Android TV box is already connected to your PC and turned on.
When the installation process is about to end, you’ll likely see “Device Driver Installation Wizard” on the window frame that pops up.
This means the process will scan your system to ensure if you have installed the proper drivers.
Once the driver is being installed, you’ll get one more window frame pop-up that tells what driver is being installed.
Click on the “Finish” on the window frame that’s being titled with “Completing the USB_Burning_Tool Setup Wizard”.
Finally, turn off your TV Box in order for you to reboot it into Recovery Mode in the following steps.
How to update firmware using Amlogic USB Burning Tool Application?
First and foremost, open the Amlogic USB Burning Tool Application. Previously, the reason why the TV box was powered up is for the correct drivers to be installed, however, it needs to be in Recovery Mode for the following steps.
The first method is Toothpick Method, on the back of the device you can see a small port named “Recovery”.
With a turned-off TV box, you should ready a long thin object, but not metal because it is a good conductor.
Insert the object you prepared into the port until you can sense that you already pushed or pressed a button.
Turn the TV box on while the button is being depressed. If you’ve done it successfully, you will be seeing the device appear at the bottom of the “Device” heading.
Now in importing an image, always make sure to use an image that suits your device because using inappropriate firmware can brick your TV box.
Now, in the upper left-hand corner, click on the File menu and choose Import image. Then you’ll need to traverse to the location where you saved the .img file and choose it.
To start, on the right-hand side, you’ll be going to see a big “Start” button with a list of options at the bottom.
Carefully choose and select “Normal Erase” and click the start button for the process to start. When the status bar turns green and saying 100%, the process is complete.
Conclusion
Hopefully, this article gives you clarity on why “Parse Burning Image Fail” exists. Now, you already have knowledge of how to update firmware using a new image file or how to use the Amlogic USB Burning Tool to update Firmware with the help of the Amlogic USB Burning Tool.
However, sometimes, it’s hard for the PC to recognize the TV box and install the proper drivers but don’t worry you’ll get into it.