Setting

How to port forward through 2 routers? Port forward through 2 routers in 5 easy steps

In order to play certain online games or use certain applications, you may need to open ports on your router. Have you heard of “port forward through 2 routers“.

Many people are not familiar with the term “port forwarding” and do not know how to go about opening the necessary ports on their router.

Our guide will show you how to port forward through 2 routers using our step-by-step instructions. After following these instructions by Edon Lazaj, you will be able to use the application or game of your choice without any issues.

How to port forward through 2 routers? Port forward through 2 routers in 5 easy steps
How to port forward through 2 routers? Port forward through 2 routers in 5 easy steps

How to determine that you have two routers on your network

How to determine that you have two routers on your network
How to determine that you have two routers on your network

If you’re not sure whether or not you have two routers on your network, there are a few ways to check.

First, check the IP address of your computer. If it starts with 192.168., 10., or 172., then your computer is most likely connected to a router. To check for sure, open the command prompt (on Windows) and type “ipconfig.” You should see something that says “Default Gateway” followed by an IP address. This is your router’s IP address.

Another way to check is to look at your wireless connection settings. In the list of available networks, there will usually be two entries for each network name: one that says “802.11g” and one that says “802.11n.” The “802.11g” network is the one that’s actually connected to the router, while the “802.11n” network is the 5GHz network created by the second router.

Once you’ve determined that you have two routers on your network, you’ll need to figure out which one is connected to the internet. The easiest way to do this is to unplug the Ethernet cable from one of the routers and see if your internet connection still works. If it does, then that router is connected to the internet; if not, then the other router is.

The next step is to find out the IP address of each router. To do this, open the command prompt (on Windows) and type “ipconfig.” You should see a list of all the network adapters on your computer, as well as their IP addresses. Find the entry for your router and note down its IP address.

See also  Should you change your routers name? How to change your routers name?

Now that you know the IP addresses of both routers, you can start port forwarding.

NAT loopback and double NAT

NAT loopback and double NAT
NAT loopback and double NAT

If you have two routers on your network, you’ll need to make sure that NAT loopback is enabled on both of them. NAT loopback allows devices on your local network to connect to each other using their local IP addresses.

To check if NAT loopback is enabled on a router, log into the router’s web interface and look for an option called “NAT loopback” or “hairpinning.” If it’s not listed in the web interface, you can try searching the router’s manual for instructions on how to enable it.

Once you’ve enabled NAT loopback on both routers, you’ll need to configure one of them as the primary router and the other as the secondary router. To do this, log into the web interface of each router and look for an option called “DHCP server.”

On the primary router, disable the DHCP server. On the secondary router, leave the DHCP server enabled.

You should now be able to connect to devices on your local network using their local IP addresses.

Next we will guide you how to port forward through 2 routers.

Guide to port forward through 2 routers

Guide to port forward through 2 routers
Guide to port forward through 2 routers

Now you are ready to port forward!

Step 1

Step 1
Step 1

First, you need to find out the IP address of both routers. The easiest way to do this is to open the command prompt (on Windows) and type “ipconfig.” You should see a list of all the network adapters on your computer, as well as their IP addresses. Find the entry for your router and note down its IP address.

Step 2

Step 2
Step 2

Next, you need to find out the port number that you want to forward. The most common port numbers are 21 (FTP), 22 (SSH), 23 (Telnet), 25 (SMTP), 80 (HTTP), 110 (POP3), and 443 (HTTPS).

Step 3

Step 3
Step 3

Once you know the IP address of both routers and the port number that you want to forward, you can start configuring your router.

Log into the web interface of your primary router and look for an option called “Port Forwarding” or “Virtual Server.”

Step 4

Step 4
Step 4

Create a new entry in the port forwarding table for the secondary router. In the “Protocol” field, select “UDP.” In the “Source IP Address” field, enter the IP address of the secondary router. In the “Destination IP Address” field, enter the IP address of the device that you want to forward the port to. In the “Source Port” field, enter the port number that you want to forward. In the “Destination Port” field, enter the same port number.

See also  How to access my routers settings? How to change my router's settings?

Step 5

Step 5
Step 5

Save your changes and reboot both routers. You should now be able to connect to devices on your local network using their local IP addresses.

Stop your port forwards from breaking

Stop your port forwards from breaking
Stop your port forwards from breaking

If you’re using port forwarding to connect to devices on your local network, you’ll need to make sure that your router’s IP address doesn’t change. If it does, all of your port forwards will break and you’ll need to reconfigure them.

The best way to prevent this from happening is to set a static IP address for your router. A static IP address is an IP address that never changes.

To set a static IP address for your router, log into the web interface of your router and look for an option called “Static IP.” Enter the IP address that you want to use for your router and save your changes.

You should now be able to connect to devices on your local network using their local IP addresses.

Troubleshooting

Troubleshooting
Troubleshooting

If you’re having trouble connecting to devices on your local network, there are a few things you can try:

Restart your router

This will often fix minor networking issues.

Check your firewall

Make sure that your firewall is not blocking the port that you’re trying to forward.

Check your NAT settings

Make sure that NAT loopback is enabled on both routers.

Reset your router

If all else fails, you can try resetting your router to its default settings. This will delete all of your custom configurations, so make sure to back up your settings before you do this.

To reset your router, look for a small button on the back of the router. The button is usually labeled “Reset” or “Factory Reset.” Press and hold the button for 10 seconds and then release it. Your router will now be reset to its default settings.

If you’re still having trouble, you can try contacting your router’s manufacturer for help.

Forward Ports Through Two Routers using VPN

Forward Ports Through Two Routers using VPN
Forward Ports Through Two Routers using VPN

The best way to forward ports through two routers is to use a VPN. A VPN (Virtual Private Network) allows you to create a secure tunnel between two devices.

When you connect to a VPN, all of your traffic will be routed through the VPN server. This means that you can use the VPN server’s IP address to forward ports.

There are many different VPN providers available, but we recommend ExpressVPN. ExpressVPN is one of the most popular and well-reviewed VPN providers in the industry.

To get started with ExpressVPN, visit their website and sign up for an account. Then, download and install the ExpressVPN app on your computer.

Once you’ve done this, open the ExpressVPN app and connect to a server. Once you’re connected, you can use the VPN server’s IP address to forward ports.

See also  How to connect multiple routers in cisco packet tracer? Is it hard to connect multiple routers in Cisco packet tracer?

Alternatives to Port Forwarding

Alternatives to Port Forwarding
Alternatives to Port Forwarding

A double-router setup isn’t the only problem that we encounter on a daily basis. There are many other reasons why it is difficult to set up port forwarding, such as:

  • Your router doesn’t support port forwarding
  • You’re behind a firewall or NAT
  • You don’t have a static IP address

If you find yourself in one of these situations, there are a few alternatives to port forwarding that you can try.

Use a VPN

As we mentioned earlier, a VPN is a great alternative to port forwarding. A VPN allows you to create a secure tunnel between two devices, which means that you can use the VPN server’s IP address to forward ports.

Use a Proxy Server

A proxy server is another great alternative to port forwarding. A proxy server is a computer that acts as an intermediary between your computer and the internet.

When you connect to a proxy server, all of your traffic will be routed through the proxy server. This means that you can use the proxy server’s IP address to forward ports.

There are many different proxy providers available, but we recommend ProxyGarden.

Use a Port Forwarding Service

A port forwarding service is another great alternative to port forwarding. A port forwarding service is a computer that acts as an intermediary between your router and the internet.

When you connect to a port forwarding service, all of your traffic will be routed through the service. This means that you can use the service’s IP address to forward ports.

F.A.Q how to port forward through 2 routers

How do you port forward if I have 2 routers?

The best way to port forward if you have 2 routers is to use a VPN. A VPN (Virtual Private Network) allows you to create a secure tunnel between two devices.

Can you port forward to 2 devices?

Yes, you can port forward to 2 devices. To do this, you will need to set up a VPN (Virtual Private Network) between the two devices.

Can you port forward a router that is behind another router?

Yes, you can port forward a router that is behind another router. To do this, you will need to use a VPN (Virtual Private Network).

Can you install 2 routers on one network?

Yes, you can install 2 routers on one network. However, we recommend that you use a VPN (Virtual Private Network) to do this.

Conclusion

If you’re looking to set up a home network and need to forward ports through two routers, follow these simple steps. We’ll walk you through the process of setting up your devices and getting everything connected so you can start streaming your favorite shows and gaming with ease. Have questions about port forwarding or networking in general? Leave a comment below and we’ll do our best to help.

Edon Lazaj

Graduate from UMass Boston with a 3.4 technical GPA. Experienced in the IT field looking to pursue a career within Cyber Security. Be a Bright Content Creator at Digitalne.tv

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button